VW T4 Syncro Cheap DIY Suspension lift Part 1 Lowering the rear diff
This video briefly explains the first stage of raising the suspension on a T4 Syncro. Its a good idea to lower the rear diff so as you do not run the rear drive shafts at too acute angle which could put stress on the CV joints. The height of the spacers is 21mm for the rear spacer and 15mm for the front spacer. Rather than using solid pieces of ali bar with holes drilled in the centre like me, you could use multiple large penny washers and make the height up that way. Part 2 is winding the front torsion b
|
|