Jumper T Lite: 1 W Crossfire mod (powers off when radio is off or when using internal module)

I will show you my attempt at modding the Jumper TLite to use an external Crossfire Nano module on 1W. The mod is really simple and you only need a resistor and an N channel MOSFET. This mod allows the external module to be turned off when the radio is turned off or when the internal multi protocol module is used. UPDATE READ BEFORE MODDING It has been brought to my attention, that there are more efficient N channel MOSFET you should use. Instead of the one I used, go with one of the following: IRL540N: IRLB8743: They both have a lower DrainSource resistance and are thus more efficient. DISCLAIMER: I do not take responsibility for your actions. If you attempt this mod, you do it at your own risk. There is a chance of breaking the radio or shorting out the battery if you do something wrong. Be aware that 18650 batteries are not a joke and can be dangerous. Also by doing this you will probably use any support from Jumper and I am pretty confident v